Glue Down Cork

Glue Down - Cork Products

 

Pre-finished, Urethane Covered

 

Imperial Cork Tiles are pre-finished with five coats of urethane applied at the factory. The urethane has a satin finish (low gloss) and the tile has a smooth texture.

 

Imperial Cork Tiles are available in the following design patterns and sizes

·       Select a design pattern

·       Select a size

·       Select a colour

·       Minimum order quantity is 40 square feet (of the same pattern and size)


 DESIGN PATTERN  TILE SIZE  SQUARE FT / BOX
 SQUARE  
 12" x 12"
 18" x 18"
 24" x 24"

 
 10.66
 10.89
 11.63

 RECTANGLE  
 12" x 24"
 12" x 36"
 18" x 24"

 
 21.31
 31.97
 31.97

 HERRINGBONE*  6" x 12"  5.33
 MOSAIC  
 12" x 12" and  3" x 3"
 18" x 18" and 4" x 4"
 24" x 24" and 4" x 4"

 
 11.63
 8.72
 15.5

 PLANK*  6" x 24"  10.66
 VARIED PLANK*  24" x 8", 6", 4"  31.97

 


All tiles are 5/32” (4mm) thick

*Herringbone: 6” x 12” beveled only

*Plank: beveled on "long side" only

*Varied Plank: 24" x 4", 6", 8" beveled on "long side" only


 

$ 10.60 per square foot  (includes adhesive for the floor)

       This floor is custom made for you.

 

Pre-finished tiles are available with a square edge or beveled edge (except where noted).

 

These tiles are pre-glued on the back. Water-based contact adhesive must be applied to the back of each tile as well as the floor surface to make adhesion possible. Adhesive is supplied for the floor surface.

 

Our urethane and contact adhesives are water-based, environmentally sensitive, quick drying, and practically odorless.

  

Optional: Areas that require constant damp mopping, such as bathrooms or kitchens, may require an extra coat of urethane. Urethane may be applied after installation.

 

Allow 3 weeks for delivery.

 
Pre-finished, Urethane Covered